oven-glove – My Recycled Bags.com

Crocodile Stitch Oven Mitt

April 13, 2013March 25, 2016Cindy6 Comments

I created this oven mitt by crocheting the crocodile stitch in the round. Working the crocodile stitch in the round is so much easier than making two panels to join together. While the oven mitt is very thick with the crocodile scales, I did line it just to be sure that a person’s hand was protected.

I have the free crochet pattern written below for the crocodile stitch oven mitt. If you haven’t tried working the crocodile scales yet in the round, I think you will enjoy crocheting this pattern. Please read the complete pattern through before beginning and adjust the opening should you need a larger size as my wrist is small so I made my opening tighter.

Crocodile Stitch Oven Mitt Pattern

J (6 mm) hook and G (4-4.25 mm) hook

Materials:
2 skeins of Red Heart Super Saver Chunky (Bulky) yarn in Windsor Blue
1/2 oz. of white cotton yarn
Fabric for lining

Finished crocheted oven mitt measures 10 inches long by 7-1/2 inches wide with a 5 inches wide opening at top

Special Stitch:
Crocodile Scale Stitch: Dc 5 stitches down first post of the 2-Dc base set, Ch 1, and then work 5 Dc up the 2nd Dc of the 2-Dc set.

Directions:
With J hook and chunky yarn, Ch 42. Join to form a ring making sure your chain is not twisted.

Lining a Crocheted Oven Mitt

April 10, 2011Cindy3 Comments

A few weeks ago I shared my crocheted oven mitt project that I made from a recycled cotton bed sheet. At that time I hadn’t been able to line the oven mitt but I just got the lining done and wanted to present the photo tutorial.

Here is my finished product with the lining sewn inside the t-yarn oven mitt. This lining project would work for any crocheted or knitted oven mitt.

The first step in this lining project is to lay out and cut your lining fabric and heat protection material. I used some scrap fabric that I had on hand along with a piece of Insul-Bright insulation material. Insul-Bright is an inexpensive material that provides heat protection and is designed for use in oven mitt and potholder projects. You just need enough fabric to cut out two oven mitt shapes and one shape from the insulation material. You need to cut out two thumbs from the printed lining fabric and the insulation material.

Next step is to