Close

Dyeing Yarn with Kool-Aid

This post is about my test of dyeing wool yarn using Kool-Aid. This is my first time dyeing wool yarn using Kool-Aid. I used a small 50 gram skein of 100% wool yarn from Thorobred in white for this test. Here are before and after photos of this dyeing test.

I used the Woolfest bag method to dye my wool yarn. I love that it just uses the sun’s power to work the magic of dyeing the yarn.

Here is how I processed my yarn. I unwound the skein of yarn and unfortunately found it had several breaks and wasn’t a continuous strand of yarn. That is why you see a few separate pieces hanging to dry in later photos.

I used grape Kool-Aid in a gallon sized ziplock baggie for this test. I added one packet of Kool-Aid to a small amount of water in the baggie with gloves on. I then added more lukewarm water about halfway to fill the baggie as shown in the photo below. Next I mixed it around and added dampen yarn. With my gloved hands, I mixed up the yarn and swished it around to get all the yarn wet and colored. Next I placed the baggie flat in the warm sun to dye for about 3 hours. I did squeeze the yarn and swish it around a bit a few times just to make sure it would all get dyed from the Kool-Aid.

After 3 hours out in the summer sun, I rinsed the yarn gently in lukewarm and then cool water as not to shock the yarn. As suggested, let the yarn cool down and then rinse it until the water runs clear. Here is a photo of the yarn after rinsing.

Patriotic Rectangle Granny Blanket

I meant to post my patriotic red, white, and blue rectangle granny for the fourth of July but got distracted. So a few days late but in honor of our Country’s freedom, here is my Veteran’s honor blanket.

This blanket was crocheted for the local Veteran’s outreach program and will be given to a Veteran who needs a blanket.

Finished size of this rectangle granny blanket is 40 inches by 50. I chained 41 to start and used this free rectangle granny blanket pattern from Suzetta Williams. I have made this pattern before and have a few modifications that you are read more about here.

Below is a closeup of a corner that shows the edging.

C2C Shawl

I am excited to share my first corner to corner or C2C shawl. The pattern I used is called corner to corner start and is a free pattern found here.


The pattern has you create little squares and chains as you proceed with the increases. After I got passed row 4, I got the hang of the pattern and everything went smoothly from there. Check out all the picture tutorials as they were very helpful for me to understand how to crochet the pattern.

I only did increases as I crocheted the pattern as I wanted a big triangle for my shawl. I used 3 skeins of I Love This Yarn from Hobby Lobby in Moody Mosaic colorway. I had just a small amount of yarn left so used about 14.9 ounces total. Final size of my shawl is

Crocheted Round Ripple Dishcloths

I bought the Blue Ribbon Round Ripple dishcloth pattern many years ago. It is a great crochet pattern and makes a beautiful dishcloth. Here is the link to the crochet pattern.

I crocheted two of these round ripple dishcloths. This one is crocheted using the original pattern as written with the popcorn stitch center.

I also have crocheted the pattern using a flat center. The flat center is nice to crochet if you are using the pattern to make a decorative cloth so you can place a dish or other item on it. With the flat center, your item can sit flat and not be tipsy.

Here is a cloth with the flat center.

I crochet the flat center using the following modifications for round 2.

T-Shirt Yarn Baby Bib

T-shirt yarn or tarn as some call it, is created by cutting a t-shirt into narrow strands. The ideal method is to find a t-shirt without side seams and cut it into one continuous strand. Then you stretch it to make what I call curled t-shirt yarn. Here is a tutorial on how to make curled t-shirt yarn.

That is the process that I used to crochet this baby bib.

I used the bottom hem from the t-shirt for the ties on the bib. The free crochet pattern with all the details can be found here. I did do a few modifications to original pattern which are as follows: